50,000 BTUs, Twin-Ring Control, and a Boil That Beats Your Stovetop — The Fuego II Power Burner Brings Commercial Heat to Your Island
A 304 stainless steel drop-in power burner with independent twin-ring zones — for rapid boils, deep frying, and true wok-searing outdoors.
The Fuego II drops into your outdoor kitchen island and puts 50,000 BTUs of twin-ring heat exactly where your grill can't reach — a rolling boil for a seafood pot, a hot enough ring for real wok searing, or a controlled simmer for a stock that needs hours. The independent inner and outer rings let you run high heat and low heat off the same burner, so you're not swapping equipment mid-cook. CoolTouch™ knobs keep adjustments safe even at full output, and the included stainless steel cover keeps the burner protected and your island looking clean between uses. Built from 304 stainless steel, it resists corrosion and holds up next to your main grill for years. Select natural gas or liquid propane above, and drop it into your island's cutout.
Why the Fuego II Belongs on Your Island
Real commercial-style output, built to hold its own next to a premium grill.
50,000 BTU
Twin-Ring Power Burner
Independent inner and outer rings deliver serious heat for boiling, frying, and wok searing, or scale down to a controlled simmer.
304 SS
Stainless Steel Body
Resists corrosion and discoloration, holding a clean, professional finish next to your main grill.
CoolTouch™
Precision Knobs
Stay-cool controls let you fine-tune the flame with confidence, from a low simmer to full output.
Cover Included
Matching Stainless Cover
Protects the burner and keeps your island looking clean when it's not in use.
What's Included in the Box▶
In the Box
- Fuego II drop-in power burner unit
- Twin-ring cast burner assembly (50,000 BTU total)
- CoolTouch™ control knob
- Matching stainless steel cover
Deep Dive — Twin-Ring Burner & Drop-In Fit▶
One Burner, Two Independent Heat Zones
The twin-ring design gives you an inner ring and an outer ring you can run independently — crank both for a full 50,000 BTUs under a big stock pot, or run just the inner ring for a tighter, more controlled flame under a smaller pan. That range is what separates a power burner from a standard side burner: one appliance covers everything from a hard rolling boil to a gentle reduction. Per the manufacturer's spec sheet, the unit itself measures 10.5" W x 22.63" D x 9.5" H, while the listed cutout is 18.5" W x 24.63" D x 10.25" H — notably wider than the unit's own footprint. That's worth double-checking with Videl before cutting your island, since cutouts are usually close to a unit's own dimensions rather than several inches wider.
Who It's For — The Deck & Den Take▶
The Deck & Den Take — This is for the cook who's hit the ceiling of what a grill can do — you need a rolling boil for a crab pot, a screaming-hot ring for a wok, or a burner that can hold a low simmer for hours without babysitting it. If you just want occasional extra burner space, a standard side burner is simpler and cheaper; this is built for people who actually cook at commercial-style output regularly. One tip: the manufacturer's listed cutout runs noticeably wider than the burner's own footprint, so measure against the actual cutout spec, not the unit's overall size, before you cut your island.
-
Serious home cooks — need rapid-boil and wok-level heat a standard side burner can't deliver.
-
Outdoor kitchen builders — adding a dedicated high-output station alongside a main grill.
-
Seasonal cooks — seafood boils, stocks, and fry stations that need sustained high heat outdoors.
Full Specifications & Dimensions▶
| Model |
Fuego II |
| Configuration |
Built-in, drop-in |
| Fuel |
Natural gas (NG) or liquid propane (LP) — select above |
| BTU Rating |
50,000 BTU |
| Burner Design |
Twin-ring, independent inner/outer zones |
| Material |
304 stainless steel |
| Cover Included |
Yes — stainless steel cover |
| Controls |
CoolTouch™ knobs |
| Overall Dimensions (W x D x H) |
10.5" x 22.63" x 9.5" |
| Cutout Dimensions (W x D x H) |
18.5" x 24.63" x 10.25" |
Warranty, Shipping & Returns▶
-
Manufacturer's Warranty — Covered by Videl Grills USA's manufacturer warranty, honored directly by the manufacturer: lifetime coverage on the cast stainless steel burner, a two-year term on components including the firebox, bezel, and cover-type parts, and a one-year term on grill components such as the gas valve and knob — against defects in materials and workmanship under normal residential use, from the original purchase date.
-
Free Shipping — Free shipping on orders over $100 to the contiguous 48 states.
-
45-Day Returns — Return new, unused, unassembled items in original packaging within 45 days. Freight return costs apply to large items.
-
Price Match Available — Found a lower price at an authorized retailer? Contact us and we'll work to match it.
Manuals & Documents▶
Frequently Asked Questions▶
What fuel types does the Fuego II run on? ▶
Natural gas or liquid propane — select your fuel type above before ordering.
How much heat does the twin-ring burner put out? ▶
50,000 BTU total, across independently controlled inner and outer rings.
What's the cutout size for installing this into my island? ▶
Per the manufacturer's spec sheet, 18.5" W x 24.63" D x 10.25" H.
What are the overall dimensions of the unit itself? ▶
10.5" W x 22.63" D x 9.5" H.
Does it come with a cover? ▶
Yes — a matching stainless steel cover is included.
What's covered under warranty? ▶
See the Warranty section above — Videl Grills USA backs the cast stainless steel burner for life, with two- and one-year terms on other components.
Can I pair this with a larger grill or a full outdoor kitchen island? ▶
Yes — many customers pair the Fuego II with a larger grill like the Gran Fuego 36", or build it into a full Alta 84I Outdoor Grill Station for a complete cooking and prep layout.
Where is Videl Grills based? ▶
Videl USA is headquartered in Ontario, California.
Do I need a professional to install the gas connection? ▶
As with any gas appliance, we recommend having a licensed contractor handle the gas line connection to ensure a safe, code-compliant installation.
Does Deck & Den help design a custom cutout guide? ▶
Yes — contact us for a custom cutout guide or build consultation.
