Sunstone SWC42EP 42" Wall Cabinet End Panel 304 SS
A Full-Height Matched Stainless End Cap That Finishes a Wall Cabinet Run Top to Bottom
The Sunstone SWC42EP covers the entire exposed side of a full-height wall cabinet — screw heads, internal panels, and utility ports — with a single clean, matched stainless surface.
The Sunstone SWC42EP is a 42" full-height wall cabinet end panel built to finish the exposed left or right side of a Sunstone wall cabinet group. In 304 stainless steel with a matching #4 brushed finish, it pin-locks onto the side of a full-height wall cabinet during setup, covering internal panels, screw heads, and utility access openings behind one continuous surface. Sized to run the full height of the cabinet, it completes the visual line of a wall cabinet installation from top to bottom rather than leaving the side edge exposed.
What the SWC42EP Solves
A full-height wall cabinet run has more exposed side surface than a standard upper cabinet — the SWC42EP is sized to cover all of it in one piece.
Matched 304 Stainless Finish — Continuous Surface Top to Bottom
Built from 304 stainless steel in Sunstone's #4 brushed finish, matching the wall cabinet line — a single continuous panel rather than a visibly separate cover piece.
Lift-and-Drop Installation — No Tools Required
The panel pin-locks onto either the left or right side of a full-height wall cabinet with a simple lift-and-drop motion — installed during the wall cabinet setup phase for the cleanest fit.
Sized for Full-Height Cabinets — No Gaps in the Finished Edge
At 42" tall, the panel matches the full height of a Sunstone full-height wall cabinet, so the finished side runs edge to edge without a visible seam or unfinished section partway up.
What's Included
SWC42EP Package
- Sunstone SWC42EP 42" full-height wall cabinet end panel (1 unit)
- Pin-lock mounting hardware
Sunstone SWC42EP Specifications
| Model | SWC42EP |
|---|---|
| Product Type | 42" full-height upper wall cabinet end panel |
| Material | 304 Stainless Steel |
| Finish | #4 Brushed |
| Installation | Pin-lock; secures to either left or right side |
Dimensions
| Dimensions (T × W × H) | 1" × 13" × 42" (2.5 × 33 × 106.7 cm) |
|---|---|
| Added Width to Layout | 1" — account for this on the side where the panel is installed |
Warranty & Buyer Assurance
- Manufacturer's Warranty — Covered by Sunstone Metal Products' 5-year limited warranty, honored directly by Sunstone. End panels are explicitly named alongside handles, peg legs, kick plates, and spacer panels as 5-year warranted components — distinct from the lifetime warranty applied to cabinet structure and finish. Labor is not included.
- Free Shipping on orders over $100 to the contiguous 48 states.
- 45-Day Returns — Deck & Den's 45-day return policy applies to this item.
- Price Match Available — found a lower authorized-dealer price? Contact us and we'll match it.
Manuals & Documents
- Installation Guide (PDF) — pin-lock mounting instructions for cabinet accessories including end panels.
- Care and Maintenance Guide (PDF) — recommended cleaning and upkeep for 304 stainless steel components.
- Sunstone Full Product Catalog (PDF) — complete Sunstone product line reference.
Sunstone SWC42EP — Frequently Asked Questions
Do I need to account for this panel in my overall cabinet layout measurements?
Yes — the panel is 1" thick and adds that full inch to the overall width of your cabinet run on the side where it's installed. Include this in your layout planning before finalizing your design.
Which side of the cabinet does this panel mount to?
The SWC42EP secures to either the left or right side of a full-height wall cabinet, depending on which end of the run is exposed. It pin-locks into place with a lift-and-drop installation.
Is this panel sized for standard upper wall cabinets or full-height cabinets?
The SWC42EP is sized specifically for full-height wall cabinets at 42" tall. For a shorter 21" upper wall cabinet section, use the Sunstone SWC21EP instead.
Does this panel match the finish of other Sunstone wall cabinets?
Yes — the SWC42EP is built from 304 stainless steel with the same #4 brushed finish used across Sunstone's wall cabinet line, so it blends seamlessly with the rest of your cabinet installation.
What is Sunstone's warranty on this panel?
The SWC42EP is covered by Sunstone's 5-year limited warranty, which explicitly applies to end panels, handles, peg legs, kick plates, and spacer panels — distinct from the lifetime warranty that covers cabinet structure and finish. Labor is not included.