Sunstone SWC12SLS 12"×12" Swivel Door Corner Wall Cabinet w/ 3 Shelves
A 360° Swivel Door Turns Your Hardest-to-Reach Corner Into Your Most Usable Storage
The Sunstone SWC12SLS rotates a full three-shelf storage bay into view with one motion — solving the corner-cabinet problem of items you can see but can't reach.
The Sunstone SWC12SLS is a 12" × 12" full-height corner wall cabinet built specifically for the awkward blind spot every corner cabinet run creates. Instead of a fixed door that leaves half the interior out of reach, a 360° swivel door rotates the entire storage area into view, giving you clear access to all three interior shelves from any angle. Built entirely from 304 stainless steel with 304 stainless rod handles, a 2" crown molding panel, and covered utility access ports, it installs using Sunstone's interlocking horizontal wall support slates — the same system used across the wall cabinet line — with additional base support rails that cup under the cabinet for a tighter wall mount.
What the SWC12SLS Solves at the Corner
A standard corner cabinet has real interior volume — the problem is reaching it. The SWC12SLS's swivel mechanism is the entire point of this cabinet.
Full Swivel Door — Rotate the Storage Into View Instead of Reaching Around It
The door and shelves rotate together as a single unit, bringing stored items to the front of the cabinet rather than requiring you to reach around a fixed door into a blind corner. The corner storage problem, solved by the mechanism rather than by careful organization.
Three Full Interior Shelves — Real Storage Volume, Not a Token Corner Fill
Three shelves give the corner genuine organizational capacity — tools, dishware, dry goods, or anything else you'd keep in outdoor kitchen storage — rather than treating the corner as unusable dead space.
Full 304 Stainless Steel Construction — Structure, Door, Shelves, and Handles
18-gauge 304 stainless steel throughout — the door panel, cabinet box, and shelves — with solid 304 stainless bar handles. Built to the same outdoor-durability standard as the rest of Sunstone's cabinet line, not a lighter-duty corner-fill compromise.
2" Crown Molding — A Finished, Built-In Appearance at the Corner
A 2" crown molding panel snaps into place at the top of the cabinet, matching the finished top-edge line used across the rest of the wall cabinet run so the corner doesn't read as a mismatched afterthought.
Replaceable Face Panel and Covered Access Ports — Built for the Long Term
A replaceable face panel supports long-term serviceability if the front ever needs attention, and covered side wall access ports plus a large covered ceiling utility access panel keep wiring and lighting routing clean and accessible without permanent openings.
Installation — Interlocking Wall Support and Extra Base Rails for Full-Height Cabinets
The SWC12SLS installs using Sunstone's horizontal wall support slates, which interlock with each other to keep the entire wall cabinet line level and straight during assembly. Because this is a full-height cabinet, it also includes additional base support rails that cup under the bottom edge of the cabinet, tightening it securely against the wall beyond what the standard wall support alone provides. Per the manufacturer's cabinet installation guide, elevate cabinet spacing typically runs 14" to 18" above base cabinets, with wall support rail spacing measured at 40½" from the top edge of the upper rail to the bottom edge of the lower rail. The cabinet arrives fully set up — installation is largely a matter of fastening the door handle and snapping the crown molding into place.
Who the Sunstone SWC12SLS Is For
- Outdoor kitchen builders with an L-shaped or corner wall cabinet layout — the swivel door design is purpose-built for the corner blind-spot problem a standard fixed-door cabinet leaves unresolved.
- Buyers who want genuine storage capacity from corner square footage — three full shelves make the corner as usable as any straight-run cabinet, rather than treating it as wasted space.
- Buyers building a matched wall cabinet run — 304 stainless construction, rod handles, and 2" crown molding match the rest of Sunstone's wall cabinet line for a continuous, finished appearance.
- Installers who want a level, aligned wall cabinet system — interlocking horizontal wall support slates and extra base support rails are built into the full-height cabinet design for a secure, straight installation.
- Buyers planning lighting or wiring runs through the wall cabinet system — covered side wall access ports and a large covered ceiling utility panel support clean routing without retrofitting later.
What's Included
SWC12SLS Package
- Sunstone SWC12SLS full-height corner wall cabinet (fully assembled)
- 360° swivel door and shelf assembly (three interior shelves)
- 304 stainless steel rod door handle (fasten on during install)
- 2" crown molding panel (snaps into place)
- Wall support rails and mounting hardware
- Base support rails (full-height cabinet feature)
- Snap-on plastic utility port covers
Sunstone SWC12SLS Specifications
| Model | SWC12SLS |
|---|---|
| Product Type | 12" × 12" full-height 360° swivel door corner wall cabinet with three shelves |
| Material | 304 Stainless Steel throughout (18-gauge door panel, cabinet box, and shelves) |
| Handles | Solid 304 stainless steel bar handles |
| Door Type | 360° swivel door and shelf assembly |
| Shelving | Three interior shelves, rotate with door |
| Top Trim | 2" crown molding panel |
| Access Ports | Covered side wall access ports; 5"×4" removable top cabinet panel for light installation |
| Installation | Pin-lock and screwed installation; interlocking horizontal wall support slates; base support rails (full-height cabinets) |
| Wall Support Rail Spacing | 40½" (top edge of upper rail to bottom edge of lower rail) |
| Elevated Cabinet Spacing | 14" to 18" above base cabinets, per manufacturer spec sheet |
Dimensions
| Dimensions (W × H × D) | 12" × 42"H (w/panel) or 44"H (w/crown) × 14"D (w/door) |
|---|
Warranty & Buyer Assurance
- Manufacturer's Warranty — Covered by Sunstone Metal Products' lifetime structure warranty on the stainless steel cabinet structure and finish, honored directly by Sunstone, free from defects in material and workmanship for the lifetime of the original purchaser under normal domestic use. Other cabinet components such as handles, hinges, and hardware may fall under a separate 5-year warranty tier per Sunstone's standard cabinet warranty structure — [[VERIFY: confirm whether any specific components of the SWC12SLS (swivel mechanism, hinges, hardware) fall under the 5-year tier separate from the lifetime structure warranty]]. Labor is not included.
- Free Shipping on orders over $100 to the contiguous 48 states.
- 45-Day Returns — Deck & Den's 45-day return policy applies to this item.
- Price Match Available — found a lower authorized-dealer price? Contact us and we'll match it.
Manuals & Documents
- SWC12SLS Specification Sheet (PDF) — full dimensions, mounting spacing, and construction detail.
- Care and Maintenance Guide (PDF) — recommended cleaning and upkeep for 304 stainless steel cabinets.
- Sunstone Full Product Catalog (PDF) — complete Sunstone product line reference.
Sunstone SWC12SLS — Frequently Asked Questions
How does the 360° swivel door work?
The door and all three interior shelves rotate together as a single unit. Instead of opening a fixed door and reaching around into the back of a corner cabinet, you rotate the entire assembly to bring the shelves into view and within reach from the front.
What are the overall dimensions of this cabinet?
The cabinet measures 12" wide × 14" deep (including the door panel) × 42" tall without crown molding, or 44" tall with the crown molding panel installed.
How is this cabinet installed?
The cabinet arrives fully assembled — installation involves fastening the door handle, snapping on the crown molding, and mounting the cabinet using Sunstone's interlocking horizontal wall support slates. As a full-height cabinet, it includes additional base support rails that cup under the bottom edge for a tighter wall mount. Wall support rail spacing measures 40½" from the top edge of the upper rail to the bottom edge of the lower rail, per the manufacturer's spec sheet.
Can I install lighting inside this cabinet?
Yes — the cabinet includes a 5"×4" removable top panel specifically for light installation, along with covered side wall access ports for routing wiring cleanly.
Does this cabinet match Sunstone's other wall cabinets?
Yes — the SWC12SLS is built from the same 304 stainless steel construction, uses the same solid stainless rod handles, and includes the same 2" crown molding trim used across Sunstone's full-height wall cabinet line, so it integrates visually with a matched cabinet run.
What is Sunstone's warranty on this cabinet?
The SWC12SLS is covered by Sunstone's lifetime structure warranty — the stainless steel cabinet structure and finish are warranted against defects in materials and workmanship for the lifetime of the original purchaser under normal domestic use. Labor is not included. [[VERIFY: confirm whether hardware components like hinges or the swivel mechanism fall under a separate, shorter warranty term]].
What shipping and return policies apply at Deck & Den?
Deck & Den offers free shipping on orders over $100 to the contiguous 48 states. The SWC12SLS is covered by Deck & Den's 45-day return policy. Price matching is available — contact us with a qualifying authorized-dealer price and we'll match it.