Sunstone SWC12ECR 12" End Crown Molding Panel for Wall Cabinets
A Matched Crown Molding End Cap That Finishes the Side of Your Wall Cabinet Row
The Sunstone SWC12ECR caps the exposed left or right end of a wall cabinet crown area, completing the front-facing crown panel with a matched side finish and covering loose wiring or debris on top of the cabinet.
The Sunstone SWC12ECR is a 12" end crown molding panel built to finish the left or right side of a Sunstone wall cabinet row where the top crown edge would otherwise remain exposed. Each wall cabinet ships with a standard front-facing crown molding panel — the SWC12ECR completes that finish by adding the matching side cap at the end of the cabinet run. In 304 stainless steel with a matching #4 brushed finish, it mounts with simple pin-lock notches during wall cabinet finishing, creating a cleaner top-edge look while helping cover debris or loose electrical wiring that may sit on top of the cabinets.
What the SWC12ECR Solves
The front-facing crown panel on your wall cabinet only finishes one side — the SWC12ECR is what closes out the end of the row.
Matched 304 Stainless Finish — Completes the Standard Crown Panel
Built from 304 stainless steel in Sunstone's #4 brushed finish to match the front-facing crown molding panel included with each wall cabinet — the two pieces read as one continuous finished edge rather than a mismatched addition.
Notch-Mount Installation — Secures to the Top Side Edge
Pin-lock notches mount the panel securely to the top left or right side edge of the wall cabinet. Install during the wall cabinet finishing stage for the cleanest fit.
Hides Top-of-Cabinet Debris and Loose Wiring
Beyond the visual finish, the end cap helps conceal debris or loose electrical wiring that may sit on top of the cabinet run — a practical detail as much as a cosmetic one.
What's Included
SWC12ECR Package
- Sunstone SWC12ECR 12" end crown molding panel (1 unit)
- Pin-lock mounting hardware
Sunstone SWC12ECR Specifications
| Model | SWC12ECR |
|---|---|
| Product Type | End crown molding panel for wall cabinet left/right side |
| Material | 304 Stainless Steel |
| Finish | #4 Brushed |
| Installation | Pin-lock notches; mounts to top left or right side edge |
Dimensions
| Dimensions (L × H) | 12" × 2" (30.5 × 5.1 cm) |
|---|
Warranty & Buyer Assurance
- Manufacturer's Warranty — Covered by Sunstone Metal Products' 5-year limited warranty, honored directly by Sunstone. End panels and crown molding panels are explicitly named alongside handles, peg legs, and kick plates as 5-year warranted components — distinct from the lifetime warranty applied to cabinet structure and finish. Labor is not included.
- Free Shipping on orders over $100 to the contiguous 48 states.
- 45-Day Returns — Deck & Den's 45-day return policy applies to this item.
- Price Match Available — found a lower authorized-dealer price? Contact us and we'll match it.
Manuals & Documents
- Installation Guide (PDF) — pin-lock mounting instructions for cabinet accessories including crown molding panels.
- Care and Maintenance Guide (PDF) — recommended cleaning and upkeep for 304 stainless steel components.
- Sunstone Full Product Catalog (PDF) — complete Sunstone product line reference.
Sunstone SWC12ECR — Frequently Asked Questions
Do I need this if my wall cabinet already has a crown molding panel?
Yes, if your cabinet sits at the end of a row. The standard crown molding panel included with each wall cabinet only finishes the front face — the SWC12ECR adds the matching side cap needed to finish the exposed left or right end of the cabinet run.
Which side of the cabinet does this panel mount to?
The SWC12ECR mounts to the top left or right side edge of the wall cabinet using pin-lock notches, depending on which end of the row is exposed.
What does this panel help with beyond appearance?
Beyond finishing the top-edge look, the panel helps cover debris or loose electrical wiring that may sit on top of the wall cabinets — a practical benefit alongside the cosmetic one.
Does this panel match the finish of other Sunstone wall cabinets?
Yes — the SWC12ECR is built from 304 stainless steel with the same #4 brushed finish used on Sunstone's standard crown molding panels and the rest of the wall cabinet line, so it reads as a continuous finished edge rather than an added piece.
What is Sunstone's warranty on this panel?
The SWC12ECR is covered by Sunstone's 5-year limited warranty, which explicitly applies to end panels, crown molding panels, handles, peg legs, and kick plates — distinct from the lifetime warranty that covers cabinet structure and finish. Labor is not included.