Four Cast Stainless Burners, Infrared Rotisserie, and LED + Halogen Lighting — Serious Built-In Performance Without the Premium Price
The Summerset Sizzler Pro 32-Inch brings four-burner cast stainless performance, a ceramic infrared rear burner, and full LED and halogen lighting to your outdoor kitchen — without the premium price tag.
Four 14,000 BTU cast stainless burners put 56,000 BTUs across 533 square inches of primary cooking surface, with heat-zone separators keeping each zone genuinely independent — no thermal bleed between a low-heat hold and a full sear. The 15,000 BTU ceramic infrared rear burner handles rotisserie: whole birds and large roasts, self-basting as they turn, for a combined 71,000 BTU system total. LED bezel indicators and halogen interior lights make evening cooks as practical as midday. Piezo ignition fires without batteries or outlets. Sized for a 30⅝" × 20¾" × 8" cutout.
What the Sizzler Pro 32 Delivers That the Base Sizzler Doesn't
The Sizzler Pro is a targeted upgrade over the base Sizzler — same 443 stainless body, same footprint, but with cast stainless burners, a dedicated infrared rear burner, and a full LED plus halogen lighting package that transforms how the grill performs and how long it lasts.
← Swipe to see all features →
Cast SS
Cast Stainless Burners — Built to Outlast Standard Tube Burners
The key upgrade over the base Sizzler: cast stainless burners resist the warping, corrosion, and high-heat degradation that standard tube burners develop over time. The result is more consistent output session after session, and a significantly longer service life before burner replacement is needed.
56,000 BTU
Four Independent Zones, Fast Preheat
Four 14,000 BTU cast stainless main burners deliver 56,000 BTU total across four independently controlled zones with heat-zone separators between them — fast preheat, strong heat recovery under load, and the ability to run dramatically different temperatures side by side without interference.
15,000 BTU
Ceramic Infrared Rear Burner — Rotisserie Ready
The 15,000 BTU ceramic infrared rear burner is designed specifically for rotisserie cooking — radiating even, intense heat at the spit rod as it turns, self-basting whole poultry, roasts, and large cuts. The base Sizzler has no rear infrared burner; this is an upgrade exclusive to the Sizzler Pro.
697 in²
Total Cooking Surface — Primary + Warming Rack
533 square inches of primary cooking surface and a 164 square inch warming rack give you 697 total square inches — room to run a full spread simultaneously, with proteins on the primary surface and bread, sides, or pre-cooked items keeping warm above.
LED + Halogen
Full Lighting Package for Evening Grilling
White-to-red LED bezel indicators show burner on/off status across all four zones at a glance. Halogen interior lights illuminate the full primary cooking surface for clear visibility after dark. Both are upgrades over the base Sizzler, which has no halogen interior lighting or LED bezel status system.
No Power
Piezo / Flame Thrower Ignition — Starts Without Batteries or Outlets
The Piezo / Flame Thrower ignition with flash tube backup fires without batteries or an external electrical outlet — making the Sizzler Pro 32 viable for island installations where power access is limited, and eliminating the dead-battery failure mode common on electronic ignition systems.
What's Included in the Box›
Grill Head
- Summerset Sizzler Pro 32-Inch built-in grill head (SZRPRO32 or SZRPRO32L)
- Four 14,000 BTU cast stainless main burners
- 15,000 BTU ceramic infrared rear burner
- 8mm round stainless steel cooking grates
- Ceramic briquette trays with stainless heat-zone separators
- Warming rack (164 in²)
- Double-walled stainless steel hood with analog thermometer (no spring assist)
- Piezo / Flame Thrower ignition with flash tube backup (no external power required for ignition)
- Exterior LED + white-to-red bezel burner status indicators; halogen interior cooking lights
- Hose and regulator (included)
Sold Separately / Optional Add-Ons
- Rotisserie kit — add at checkout
- Drop-in infrared sear burner — upgrades one main burner zone
- Drop-in griddle plate
- Grill cover (Deluxe 32-Inch Sizzler / TRL cover — also fits this model)
- Insulated Grill Jacket for Sizzler / Sizzler Pro 32-Inch — required for combustible island installations
- Freestanding cart (where available)
Deep Dive — Sizzler Pro 32›
Ceramic Briquette System + Four-Zone Separators — Even Heat From Edge to Edge
The ceramic briquette trays above the burners absorb and re-radiate heat evenly across the full cooking surface, smoothing out the cold spots that form between burners on larger grills. They also vaporize drippings on contact, generating the smoky flavor you'd expect from charcoal or wood on a gas grill. Heat-zone separators between each burner maintain true thermal isolation between zones — so a gentle low-heat cook on one side doesn't drift up from the high-heat sear on the other. When the session ends, the briquette trays pull out for a quick clean without tools.
How the Sizzler Pro 32 Fits Into the Summerset Lineup
The base Sizzler 32 uses 12,000 BTU standard tube burners (48,000 BTU total), has no rear infrared burner, and includes no interior halogen lighting. The Sizzler Pro 32 upgrades to cast stainless burners at 14,000 BTU each (56,000 BTU total), adds the 15,000 BTU infrared rear burner, and brings in the full LED + halogen lighting package. The TRL Pro 32 takes the next step: cast stainless burners at a higher 20,000 BTU each (60,000 BTU total), a more powerful 15,000 BTU rear infrared burner, a 304 stainless body (vs 443 on the Sizzler Pro), and more structural upgrades — at a higher price. If you want the TRL Pro's performance ceiling, it's worth the step up. If you want four-burner cast stainless performance with infrared rotisserie and full lighting at a value price point, the Sizzler Pro 32 is the right call.
Who It's For — The Deck & Den Take›
The Deck & Den Take — The Sizzler Pro 32 is the grill we recommend when someone needs a four-burner built-in in a compact footprint and wants cast stainless burners and infrared rotisserie capability without stepping up to TRL Pro pricing. It lights without batteries, and the lighting package makes evening cooking genuinely practical — things you don't always get at this price point. Two things worth flagging before you order: no spring-assisted hood (the lid requires manual lifting and is heavier than the TRL Pro or Quest Series), and the rotisserie kit is sold separately rather than included. Plan those in before your first session.
-
Outdoor kitchen builders who want cast stainless performance without TRL Pro or Quest pricing — the Sizzler Pro 32 delivers cast stainless burners, infrared rotisserie capability, and a full LED + halogen lighting package at a meaningfully lower price than the TRL Pro 32.
-
Buyers working with a compact island footprint — the 30⅝" cutout fits where a TRL Pro 32 (30½") or Quest 30 (28½") would, with the same Gold Standard Lifetime Warranty.
-
Grillers who want infrared rotisserie without paying for it twice — the rear infrared burner is built in; just add the rotisserie kit at checkout and you're cooking whole birds and large roasts without any additional grill modifications.
-
Cooks who want multi-zone flexibility in a 32-inch footprint — four independent burners with heat-zone separators let you run genuinely different temperatures side by side without thermal bleed between zones.
-
Evening and year-round grillers — the LED bezel status system and halogen interior lights make cooking after dark as practical as cooking at noon, a capability the base Sizzler doesn't have.
-
Island builds without nearby power access — the Piezo / Flame Thrower ignition fires without batteries or outlets, keeping the Sizzler Pro 32 viable in island locations where running power to the grill isn't practical.
Full Specifications & Dimensions›
General
| Brand |
Summerset Grills |
| Collection |
Sizzler Pro |
| Model Numbers |
SZRPRO32 (Natural Gas) / SZRPRO32L (Liquid Propane) |
| Configuration |
Built-In (freestanding cart sold separately where available) |
| Fuel Options |
Natural Gas or Liquid Propane (select above; LP conversion via orifices/accessories where applicable) |
| Exterior Construction |
443 Stainless Steel body; cast stainless main burners |
Performance
| Main Burners |
4 × 14,000 BTU cast stainless burners (56,000 BTU total) |
| Rear Infrared Burner |
15,000 BTU ceramic infrared (rotisserie) |
| Total BTU (Main + Rear) |
71,000 BTU combined |
| Primary Cooking Area |
533 in² (30¼" W × 18¼" D) |
| Warming Rack |
164 in² |
| Total Cooking Area |
697 in² |
| Cooking Grates |
8mm round stainless steel rod grates |
| Heat Management |
Ceramic briquette trays; stainless heat-zone separators |
| Ignition |
Piezo / Flame Thrower with flash tube backup (no batteries or external power required for ignition) |
Construction & Features
| Hood |
Double-walled stainless steel; analog thermometer (no spring assist) |
| Lighting |
Exterior LED + white-to-red bezel burner status indicators; halogen interior cooking lights |
| Hose & Regulator |
Included |
Dimensions & Installation
| Overall Dimensions (W × D × H) |
32½" × 25⅝" × 20" (82.6 × 65.1 × 50.8 cm) |
| Cutout Dimensions (W × D × H) |
30⅝" W × 20¾" D × 8" H (77.8 × 52.7 × 20.3 cm) |
| Combustible Island Installation |
Summerset Insulated Grill Jacket for Sizzler / Sizzler Pro 32-Inch required — sold separately |
| Weight |
143 lb (approx.) |
Warranty, Shipping & Returns›
-
Manufacturer's Warranty — Covered by Summerset's Gold Standard Lifetime Warranty for construction, cooking grates, burners, burner covers, valves, heat zone separators, ceramic briquette system, and temperature gauge, honored directly by Summerset. Electrical components and all other parts are covered for three (3) years. Labor is not included. Warranty must be registered online within 30 days of purchase. Valid for the original purchaser at the original delivery site. Discoloration, surface rust, corrosion, or oxidation from harsh environments, chemicals, or overheating is not covered.
⚠️ California Proposition 65 Warning — This product can expose you to chemicals including Chromium (hexavalent compounds), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
-
Free Shipping on orders over $100 to the contiguous 48 states.
-
45-Day Returns — Deck & Den's 45-day return window gives you time to confirm the Sizzler Pro 32 is the right fit for your island before you commit.
-
Price Match Available — found a lower authorized-dealer price? Contact us and we'll match it.
Manuals & Documents›
Summerset Sizzler Pro 32-Inch — Frequently Asked Questions›
What are the cutout dimensions for the Sizzler Pro 32?›
The required cutout opening is 30⅝" wide × 20¾" deep × 8" high. Note that the cutout height is shallower than the TRL Pro 32 (9⅜") or Quest 30 (10¼") — confirm your island accommodates these dimensions, particularly the 8" height, before ordering. Download the Cut-Out Sheet above for contractor reference.
How many BTUs does the Sizzler Pro 32 produce?›
The four main cast stainless burners produce 56,000 BTU combined (14,000 BTU each). The ceramic infrared rear burner adds 15,000 BTU for rotisserie cooking, for a combined system total of 71,000 BTU. All burner circuits are independently controlled.
What's the difference between the Sizzler Pro 32 and the base Sizzler 32?›
Both share the 443 stainless exterior and the same overall dimensions. The Sizzler Pro upgrades four things over the base Sizzler: cast stainless burners at 14,000 BTU each (the base Sizzler uses 12,000 BTU standard tube burners), a 15,000 BTU ceramic infrared rear burner for rotisserie (not available on the base Sizzler), halogen interior cooking lights, and LED white-to-red bezel burner status indicators. If you want rotisserie capability or evening cooking visibility, the Sizzler Pro is the version to choose.
How does the Sizzler Pro 32 compare to the TRL Pro 32?›
Both are four-burner cast stainless built-ins with a 15,000 BTU infrared rear burner and halogen interior lighting. The TRL Pro 32 runs 20,000 BTU per burner (60,000 BTU total) vs 14,000 BTU per burner on the Sizzler Pro (56,000 BTU total). The TRL Pro has a 304 stainless body vs the Sizzler Pro's 443 stainless — 304 offers better corrosion resistance, especially in coastal climates. The TRL Pro 32 also has a spring-assisted hood; the Sizzler Pro 32 does not. Both carry the same Gold Standard Lifetime Warranty. The Sizzler Pro 32 is the value choice; the TRL Pro 32 is the performance step-up.
Is the rotisserie kit included?›
No — the rotisserie kit is sold separately and available as an add-on. The 15,000 BTU ceramic infrared rear burner is built in and ready for rotisserie use; you need the rotisserie kit (spit rod and motor hardware) to actually use it. Add it at checkout. A dedicated rotisserie kit for the Sizzler / Sizzler Pro 32-inch is available from Summerset.
Does the Sizzler Pro 32 have a spring-assisted hood?›
No. The double-walled stainless hood opens manually — no spring-assist mechanism. The hood is heavier to lift than the spring-assisted hoods on the TRL Pro Series or Quest Series. If spring-assist matters to your workflow, consider the TRL Pro 32 instead.
Does the ignition require batteries or external power?›
No — the Piezo / Flame Thrower ignition with flash tube backup generates its own spark without batteries or an electrical outlet. The interior halogen lights and LED bezel indicators do require electrical power to operate; only the ignition itself is battery-free and power-free.
Is a grill liner required for built-in installation?›
If your island is built from combustible materials (wood framing, plastic composites), yes — the Summerset Insulated Grill Jacket for Sizzler / Sizzler Pro 32-Inch is required and sold separately. Islands built from non-combustible materials with proper clearances may not require it; confirm against the user manual and local codes before installation.
What fuel types are available?›
The Sizzler Pro 32 is available in Natural Gas (SZRPRO32) and Liquid Propane (SZRPRO32L) — select your fuel type above before adding to cart. A hose and regulator are included. LP conversion may require orifices or accessories; confirm with your installer before attempting any fuel conversion.
What stainless steel grade is the Sizzler Pro 32?›
The exterior body uses 443 stainless steel — a ferritic alloy with solid corrosion resistance, widely used in outdoor grill bodies at this price tier. The main burners use cast stainless steel, which is the meaningful longevity upgrade over the base Sizzler's standard tube burners. For comparison, the TRL Pro 32 and Quest 30 use 304 stainless throughout — which offers superior corrosion resistance, particularly in coastal or high-humidity environments. If you're in a salt-air or coastal climate, the TRL Pro 32 or Quest 30 may be better long-term choices.
What is Summerset's warranty on the Sizzler Pro 32?›
Summerset covers the Sizzler Pro 32 with their Gold Standard Lifetime Warranty for construction, cooking grates, burners, burner covers, valves, heat zone separators, ceramic briquette system, and temperature gauge — for the life of the original owner. Electrical components and all other parts carry a three-year warranty. Labor is excluded. Warranty must be registered online within 30 days of purchase; valid for the original purchaser at the original delivery site.
What shipping and return policies apply at Deck & Den?›
