Hathaway Augusta 8-ft Non-Slate Pool Table
Tournament-Grade Cushions and Solid Maple Rails — Without the Weight or Cost of Slate
The Hathaway Augusta 8-ft Pool Table brings K-66 gum rubber cushions, real hardwood rails, and fine-furniture craftsmanship to your home game room — no slate required.
The Hathaway Augusta 8-ft Non-Slate Pool Table (model BG2527) is an 8-foot billiard table built for players who want serious playability and traditional styling without committing to the structural demands of a slate table. A 1-inch thick MDF playfield engineered for flatness anchors the playing surface, while 4.5-inch solid maple hardwood top rails with inlaid diamond sights and tournament-tested K-66 profile gum rubber cushions deliver the ball action you expect from a table twice this price. The arched-frame maple veneer cabinet, decorative routing, and intricate poly-resin ball-and-claw legs make it as handsome as it is functional. Select your preferred finish above — available in Mahogany with red felt or Walnut with camel felt.
Where Traditional Craftsmanship Meets Real Ball Action
From the cushions that keep shots honest to the cabinet that earns a second look, the Augusta earns its place as one of the most complete non-slate pool tables in this class.
Tournament-Tested Gum Rubber Cushions
K-66 profile gum rubber cushions are the same profile used on tournament tables — they return the ball at true angles with consistent speed, shot after shot. If you have played on a table with dead rails that kill your bank shots, you know exactly what this upgrade means.
Solid Maple Hardwood Rails with Inlaid Diamond Sights
Real solid maple top rails — not laminate — give you the durability and precision alignment of furniture-grade hardwood. The inlaid diamond sights let players line up shots consistently, and the 4.5-inch width provides the rail mass that keeps cushion response stable over time.
MDF Playfield Engineered for Flatness
The 1-inch thick MDF play surface is specifically engineered for a flat, stable playing field — the single most important factor in consistent ball roll. The nylon/wool blend felt lays smooth across the full 88 x 44 inch playing area for true, predictable shot behavior.
Impact-Resistant Rail Anchoring System
The Augusta uses a bolt-through, high-performance rail anchoring system that fuses the playfield and rails together as a single rigid unit. This prevents the rail flex and gaps that cause inaccurate rebounds on cheaper tables — a structural upgrade that pays off on every bank shot.
Maple Veneer Cabinet with UV-Cured Multi-Step Finish
The arched-frame cabinet is 1-inch thick MDF covered in a maple veneer, finished with a UV-cured multi-step fine furniture coating that resists fading and moisture. The decorative routing and traditional profile make this a table that fits naturally into a study, den, or game room — not an obvious piece of rec equipment.
Poly-Resin Carved Legs with 2-in Adjustable Levelers
Intricately detailed poly-resin ball-and-claw legs give the Augusta its distinctive traditional silhouette. Each leg includes a 2-inch adjustable leveler so you can dial in a perfectly flat playing surface regardless of your floor's imperfections.
Built Rigid from the Inside Out
The Augusta's structural engineering goes well beyond what you can see. Inside the cabinet, finger-jointed interlocking cross and center support beams — 4 inches wide — run the full interior of the table to prevent racking and flex. At the corners, the cabinet connects to the leg block and leg post through transition plates and heavy-gauge powder-coated steel gusset plates. This steel-reinforced connection system is what keeps the table solid after years of play rather than developing the wobble and creaks that plague lesser builds.
Who the Hathaway Augusta 8-ft Pool Table Is For
- Home game room builders who want furniture-grade styling — the maple veneer cabinet, arched frame, decorative routing, and ball-and-claw legs look like fine furniture, not rec equipment. This table fits rooms that have a standard.
- Players upgrading from a 7-ft or entry-level table — the full 8-foot playing surface, K-66 cushions, and solid maple rails represent a meaningful jump in playability and feel.
- Buyers comparing non-slate vs. slate pool tables — the Augusta offers a practical middle ground: tournament-grade cushions and rails on a flat MDF surface, without the weight, cost, and installation complexity of slate.
- Families and casual-to-intermediate players — arrives with a complete accessory kit (balls, cues, rack, bridge, chalk, brush), so there is nothing additional to source before the first game.
- Buyers who value a traditional billiards aesthetic — if modern or farmhouse styles aren't your language, the Augusta's mahogany or walnut finish and classic carved legs speak the right one.
- Shoppers in the 8-ft non-slate pool table category — for those comparing Hathaway pool tables by size, the 8-foot playing surface plays truer than 7-foot tables and trains better habits without the full footprint commitment of a 9-foot table.
What's Included
Table Components
- Augusta 8-ft pool table play surface (MDF playfield with felt, rails, cushions, pockets)
- Poly-resin ball-and-claw leg set with levelers
- All assembly hardware and tools
- Assembly instruction manual
Gameplay Accessories
- (1) Complete set of regulation 2-1/4-in billiard balls
- (2) 57-in 2-piece pool cue sticks
- (1) Aluminum bridge head with 2-piece bridge stick
- (1) Racking triangle
- (1) Rail brush
- (2) Cue chalk
Hathaway Augusta BG2527 Specifications
General
| Brand | Hathaway |
|---|---|
| Model | BG2527 (components NG2527A + NG2527B) |
| Table Size | 8-foot |
| Available Finishes | Mahogany with red/burgundy felt; Walnut with camel felt |
| Number of Players | 2 |
| Assembly Required | Yes — approximately 75 minutes; all tools included |
Playfield & Playing Surface
| Playfield Material | 1-inch thick engineered MDF, engineered for flatness and stability |
|---|---|
| Playfield Dimensions | 88 in L x 44 in W (224 cm x 112 cm) |
| Felt / Cloth | Top-grade blended nylon/wool cloth; red (Mahogany finish) or camel (Walnut finish) |
Rails, Cushions & Structure
| Top Rails | 4.5-in solid maple hardwood with inlaid diamond sights |
|---|---|
| Cushions | K-66 profile gum rubber (tournament-tested) |
| Rail Anchoring | Bolt-through, impact-resistant system — fuses playfield and rails as one unit |
| Interior Support | Rigid 4-in finger-jointed interlocking cross and center beams; perimeter anchor blocks |
| Corner Reinforcement | Powder-coated steel gusset plates and transition plates connecting cabinet to leg block and leg post |
Cabinet & Exterior
| Cabinet Construction | 1-in thick MDF, arched-frame design with decorative routing |
|---|---|
| Cabinet Veneer | Maple veneer |
| Finish | UV-cured, multi-step fine furniture finish |
| Legs | Intricately detailed poly-resin ball-and-claw style with 2-in adjustable leg levelers |
| Pockets | Color-blended polyurethane deluxe shield pockets |
Dimensions & Weight
| Overall Dimensions | 96"L x 52"W x 31"H |
|---|---|
| Playfield Dimensions | 88 in L x 44 in W (224 cm x 112 cm) |
| Playfield Thickness | 1 in (2.5 cm) |
| Weight | 352.5 lbs |
Warranty & Buyer Assurance
- Manufacturer's Warranty — Covered by Hathaway's 180-day limited warranty against defects in materials and workmanship, honored directly by the manufacturer. During the warranty period, Hathaway may choose to repair or replace defective parts at their discretion. Claims require proof of purchase, the product model number (BG2527), and the part number(s) in question. Normal wear, commercial use, and misuse are excluded.
- Free Shipping — Complimentary standard freight shipping on orders over $100 to the contiguous 48 states.
- 45-Day Returns — Not the right fit? Return within 45 days of delivery per Deck & Den's return policy.
- Price Match Available — Found a lower authorized price? Deck & Den will match it.
Manuals & Documents
-
Assembly & Owner's Manual (PDF) — Illustrated assembly instructions including parts list and hardware guide.
- Warranty Document (PDF) — Hathaway 180-day limited warranty terms and claim instructions.
Hathaway Augusta 8-ft Pool Table — Frequently Asked Questions
How much room do I need for an 8-foot pool table?
For a comfortable full-length shot from every position, allow at least 5 feet of cue clearance around all four sides of the table. With a standard 58-inch cue, this means a minimum room size of approximately 13 feet 6 inches wide by 17 feet long for an 8-foot table. If your room is slightly smaller, shorter cues (48–52 inches) are widely available and can reduce the space requirement without significantly affecting casual play.
Is the Augusta a non-slate pool table? How does MDF compare to slate?
Yes — the Augusta uses a 1-inch thick MDF playfield rather than slate. MDF (medium-density fiberboard) engineered specifically for pool tables is designed to be flat and stable for residential play. It weighs significantly less than slate and does not require professional leveling after each move. The tradeoff is that slate is denser, more dimensionally stable over very long periods, and is the standard for professional and tournament play. For recreational home use — families, casual players, developing players — an engineered MDF surface like the Augusta's delivers very good results at a fraction of the weight and installation complexity.
What is K-66 cushions and why do they matter?
K-66 is a cushion profile specification — specifically the angle and shape of the gum rubber rail cushion — that is used as the standard on most American pool tables. K-66 gum rubber cushions return balls at accurate, predictable angles with consistent speed. Tables with inferior or degraded cushions produce "dead" rebounds that feel slow and inaccurate, making bank shots guesswork. The Augusta's tournament-tested K-66 profile cushions deliver the same rail response you would find on quality commercial tables.
What does the bolt-through rail anchoring system do?
The bolt-through rail anchoring system secures the rails to the playfield with bolts that pass through both components and lock them together as a single rigid unit. On tables that use surface-mount brackets or adhesive-only rail systems, rails can shift, develop gaps, or flex — which causes inconsistent rebound behavior. The bolt-through approach on the Augusta eliminates rail movement and maintains the rail-to-cushion geometry that accurate play depends on.
What finish options are available for the Augusta?
The Augusta is available in two finish-and-felt combinations: Mahogany finish with red/burgundy felt, and Walnut finish with camel felt. Both share identical construction, rails, cushions, and structural specifications. Select your preferred combination using the options above.
What accessories are included in the box?
The Augusta ships as a complete, ready-to-play kit. Included are a full set of regulation 2-1/4-inch billiard balls, two 57-inch 2-piece pool cues, an aluminum bridge head with a 2-piece bridge stick, a racking triangle, a rail brush, two pieces of cue chalk, and all assembly hardware and tools. You do not need to purchase anything additional to start playing after assembly.
How difficult is the Augusta to assemble, and what tools are needed?
Hathaway rates assembly at approximately 75 minutes. All required tools are included in the box — no separate tool purchases needed. Two adults are recommended, particularly for attaching the legs and setting the table upright. The illustrated assembly manual walks through each step in sequence.
Can I move this table after it is assembled?
The Augusta is a permanent home installation piece, not a portable table. Moving it requires disassembly, moving the components separately, and reassembly at the new location. Unlike slate tables, no professional releveling service is typically required after a move, but disassembly and reassembly does need to be done carefully to avoid damage to the playfield or cabinet.
How do I level the table after assembly?
Each of the Augusta's ball-and-claw legs includes a 2-inch adjustable leg leveler. After placing the assembled table in its final position, place a standard level on the playfield and adjust the individual leg levelers until the surface reads flat in both directions. For best results, check level across multiple positions on the playfield surface.
How do I care for the felt?
Brush the felt regularly with a pool table brush, always working in one direction from one end of the table toward the other — never in circles. Remove chalk dust and debris after each session. Avoid eating or drinking over the table. If the felt is stained, blot rather than rub, and consult a billiard supply specialist for appropriate cleaning products. Keeping the table covered when not in use will significantly extend the felt's life.
What is the warranty on the Hathaway Augusta?
The Augusta is covered by Hathaway's 180-day limited warranty against defects in materials and workmanship, honored directly by the manufacturer. To make a claim, have your proof of purchase, the model number (BG2527), and the relevant part number(s) ready. Normal wear, commercial use, and misuse are not covered. Deck & Den is an authorized Hathaway dealer and can assist with warranty facilitation.
Can I order replacement parts or replace the felt?
Yes. Hathaway / Blue Wave Products maintains a retail parts program. Contact Blue Wave customer service at 1-800-759-0977 (Monday through Friday, 8 am to 5 pm CST) with your model number and part number from the assembly manual. Felt replacement is a common service performed by local billiard technicians — search for billiard table re-felting services in your area when the time comes.
Will this ship to my home, and how does delivery work?
Yes. Deck & Den ships the Augusta free to addresses in the contiguous 48 states. Due to the table's weight and size, it ships via freight carrier. Orders typically process within 1–3 business days. Contact Deck & Den at 1-833-283-2233 or info@deckandden.com for delivery timelines and to coordinate delivery logistics — freight deliveries typically require someone to be present to receive and inspect the shipment.
Can I return this table if it doesn't work for my space?
Yes. Deck & Den accepts returns within 45 days of delivery. Review the full return policy at deckandden.com/pages/returns for conditions and instructions, or call 1-833-283-2233.